Laguna Fusion 1, 2 or 3 — which table saw? (2026 guide)

Choosing a table saw is choosing the heart of the workshop. It sits centrally, it is used every day, and its precision sets the ceiling for how accurately you can build. The Laguna Fusion series is American premium — three models that all share the same DNA (254mm blade, T-glide fence, cast iron table), but which differ dramatically in motor power, construction and rip capacity. The Fusion 1 is the entry-level machine for the home workshop. The Fusion 2 mod.2022 is the semi-professional step up. The Fusion 3 is a cabinet-class professional saw with 1320mm rip capacity in the 52-inch variant.

We distribute all three models and have seen hundreds of workshops make their choice. The difference between "buying right" and "buying wrong" in the Fusion series is around 15,000 SEK and a rebuild of the workshop — so it is worth reading through before you order. Laguna Tools was founded in 1983 in Laguna Hills, California, by Torben Helshoj, who imported European machinery to the USA. The Fusion series launched in 2008 as a "hybrid table saw" — a middle class between jobsite saws and traditional cabinet saws. The Fusion 2 and Fusion 3 received a major update in 2022 (mod.2022) with an improved rip fence, a digital bevel indicator and improved dust collection. This guide walks through all three models with verified specs from the official Laguna Tools product pages and from EU-distributören (the EU distributor) as of April 2026.

Comparison table — Fusion 1 vs 2 vs 3

All values are verified against the official Laguna Tools product pages and our EU specifications. The EU versions differ marginally from the American ones (230V instead of 110V/220V, a 250mm blade on the Fusion 2 mod.2022 instead of 254mm on the US version).

<CompareTable caption="Laguna Fusion 1 vs 2 vs 3 — official specs 2026" columns={[ { key: "param", label: "Parameter", highlight: true }, { key: "f1", label: "Fusion 1" }, { key: "f2", label: "Fusion 2 mod.2022" }, { key: "f3", label: "Fusion 3" } ]} rows={[ { param: "Motor", f1: "1.5 HP (1.1 kW)", f2: "1.75 HP (1.3 kW)", f3: "3 HP (2.2 kW)" }, { param: "Voltage", f1: "230V single phase", f2: "230V single phase", f3: "230V single phase" }, { param: "Rated current", f1: "~10-12 A", f2: "13 A", f3: "14 A" }, { param: "Motor type", f1: "TEFC", f2: "TEFC", f3: "TEFC" }, { param: "Speed", f1: "3,450 rpm", f2: "3,800 rpm", f3: "3,450 rpm" }, { param: "Blade", f1: "254 mm (10")", f2: "250 mm (EU) / 254 mm (US)", f3: "254 mm (10")" }, { param: "Depth of cut 90°", f1: "79 mm", f2: "79 mm", f3: "79 mm" }, { param: "Depth of cut 45°", f1: "54 mm", f2: "56 mm", f3: "54 mm" }, { param: "Table size", f1: "686×508 mm cast iron + steel wings", f2: "792×1118 mm cast iron", f3: "Cast iron + cast iron wings" }, { param: "Rip capacity std", f1: "762 mm (30")", f2: "914 mm (36")", f3: "914 mm / 1320 mm (52" variant)" }, { param: "Max rip capacity with extension", f1: "1320 mm", f2: "1320 mm", f3: "1320 mm (std on 52" variant)" }, { param: "Trunnion", f1: "Table-mounted, steel", f2: "Partial cast iron, table-mounted", f3: "Full cast iron, cabinet-mounted" }, { param: "Dust port", f1: "4" (100 mm)", f2: "4" (100 mm)", f3: "4" (100 mm) + 1.5" guard" }, { param: "Weight", f1: "~132 kg", f2: "160 kg", f3: "175 kg (385 lbs)" }, { param: "Target user", f1: "Hobby / advanced hobby", f2: "Semi-professional", f3: "Professional / cabinet-class" } ]} />

All three models share the same family traits: a T-glide rip fence with twin rails and cam-lock, a precision-machined cast iron table, a 4-inch dust port, and compatibility with the same accessories (zero clearance insert, dado insert, riving knife). They differ above all in motor power, the build quality of the trunnion and wings, and in maximum rip capacity. The figures above show that the biggest difference is not depth of cut (an identical 79mm on all) but motor power: 3 HP on the Fusion 3 is twice that of the Fusion 2 and three times that of the Fusion 1. It is this power that makes the Fusion 3 a true professional machine.

Fusion 1 — the home workshop

The Fusion 1 is the entry-level machine in the series. With 1.5 HP (1.1 kW) at 230V single phase it draws around 10-12 A at full load, meaning you can connect it to an ordinary 10 A socket in the workshop without adding a new installation. The table is precision-machined cast iron in the centre (686×508mm) with steel wings on the sides — functional, but they flex under heavy pressure. The trunnion (the outer system that holds the blade and controls its angle) is mounted in the table rather than in the cabinet, which means that vibrations from feeding stock can affect calibration over time.

Strengths:

• Compact footprint — fits in a 10-12 m² workshop
• Cast iron table in the centre (same quality as the larger models)
• T-glide rip fence with cam-lock — the same fence system as the Fusion 2/3
• Good value: 18,000-22,000 SEK incl. VAT
• 230V single phase — no special installation required

Limitations:

• 1.5 HP bogs down in 60mm oak or under double loading
• Steel wings flex during heavier work
• Table-mounted trunnion requires more frequent calibration
• Standard rip capacity only 762mm — needs a table extension for plywood

Ideal use cases: Home joinery with mixed material (pine, birch plywood, thin oak), small furniture projects (bedside tables, shelves, drawers), hobby instrument building, wooden model making. Not intended for daily professional use or for hard wood species such as walnut, teak or oak above 30mm in thickness.

Accessories that elevate the Fusion 1: The wheel system is the first thing you should invest in if the workshop is cramped — the machine is rolled out of the way when it is not in use and brought out again in 30 seconds. The table extension to 1320mm is the next step if you need to rip plywood regularly. With an extension and wheel system, the Fusion 1 becomes surprisingly capable even for small businesses.

Fusion 2 mod.2022 — semi-professional

The Fusion 2 mod.2022 is the middle step — and for many the right choice. The 2022 update improved the rip fence (a new cam-action with smoother adjustment), added a digital bevel indicator for blade tilt, and improved dust collection around the blade cassette. The motor is 1.75 HP (1.3 kW output / 1.55 kW input in the EU version) — not dramatically more than the Fusion 1, but the more important upgrade is the construction: cast iron wings replace the steel on the sides, and the trunnion is now partially cast iron. The weight increases from around 132 kg to 160 kg, and this is noticeable in the stability during aggressive rip cuts.

Strengths:

• Cast iron wings on the sides — no vibrations
• Partial cast iron trunnion — holds calibration better
• Digital bevel indicator (2022 feature)
• Improved rip fence (2022 feature)
• 56mm depth of cut at 45° (2mm more than the Fusion 1 and 3)
• 914mm standard rip capacity (outright, no extension needed)

Limitations:

• 1.75 HP is not enough for daily 60mm+ hardwoods
• Table-mounted trunnion — holds better than the F1 but not F3 class
• 250mm blade (EU version) instead of 254mm on the Fusion 1/3

Ideal use cases: Small joineries where 80% of the work is 16-22mm plywood and softer solid wood up to 40mm, kitchen fitting, door manufacturing in soft wood species, wardrobes, children's room furniture in birch plywood, one-person businesses with mixed work. The Fusion 2 mod.2022 is the model we sell the most of — the 28,000-32,000 SEK price point is the sweet spot between hobby and professional.

Differences vs the Fusion 1: Same footprint, but you get cast iron wings, a better trunnion, a better fence, a larger standard rip capacity (914 vs 762 mm) and 17% more motor power. For 10,000 SEK more than the Fusion 1, it is the simplest upgrade in the series.

Fusion 3 — the flagship

The Fusion 3 is the leap to true cabinet class. The exact spec that makes the difference is not the motor (even though 3 HP is 71% more than the Fusion 2), but the trunnion construction: the Fusion 3 has a full cast iron trunnion mounted directly in the cabinet — not in the table. This means the table hangs from the trunnion, not the other way around. The result is a calibration that holds for years without needing to be reset, even under daily professional use. This is the same architecture as the SawStop PCS and other true cabinet saws.

The motor is 3 HP TEFC (Totally Enclosed Fan Cooled, 2.2 kW) at 230V single phase with a 14 A rated current. The TEFC enclosure is important in a joinery environment — dust and chips do not enter the rotor, and the bearings last for 10,000+ operating hours. The standard version (36-inch, 914mm rip capacity) costs around 30,000-35,000 SEK. The 52-inch variant (MTSF3362203-0130-52) with 1320mm rip capacity outright costs around 35,000-38,000 SEK and is the one we recommend for professional workshops.

Strengths:

• 3 HP never bogs down — 60mm oak feeds without effort
• Full cast iron trunnion mounted in the cabinet (calibration holds for years)
• 1320mm rip capacity on the 52-inch variant = whole plywood sheet 2440×1220mm
• Improved dust shroud around the blade (2022 update) — >90% chip collection
• Thicker steel plate cabinet — stays completely still during aggressive feeding
• Electromagnetic starter — the blade stops in around 4 seconds on power cut
• T-glide with zero-backlash adjustment

Limitations:

• Requires a 16 A supply (often a dedicated installation via a CEE socket)
• 175 kg — not movable without a wheel system or a forklift
• The 52-inch variant requires around 2.5m of free floor space to the right of the machine
• Higher price — but cheaper than the SawStop PCS (~68,000 SEK) and the Hammer K3 (~60,000 SEK)

Ideal use cases: Professional joineries with daily operation of 6-8 hours, boat building (hard mahogany, teak), door manufacturing in oak/ash, large-scale production of kitchen cabinets, edge gluing of table tops where parallel alignment is critical, workshops that rip whole plywood sheets as a routine task. If you build furniture for sale and the table saw runs more than 20 hours a week, the Fusion 3 is the right choice. You will never wish for a smaller machine.

Accessories that change the game

Four accessories fundamentally change what a Fusion saw can do. They fit all three models (some are even included as standard on the Fusion 3) and they are well worth the investment.

Table extension to 1320mm

This is the accessory that turns a Fusion 1 or Fusion 2 into a full-grown production saw. The standard rip capacity on the Fusion 1 is 762mm and on the Fusion 2 it is 914mm — neither is enough to rip a whole plywood sheet (2440×1220mm) as a standalone unit. The extension expands this to 1320mm outright, with an aluminium fence, MDF work surface and height-adjustable supports. With the extension installed you can rip 1220mm wide plywood without an auxiliary table or an infeed rail.

On the Fusion 3 52" variant, 1320mm is included as standard — then the extension is not needed. But if you bought the 36" variant of the Fusion 3, you can retrofit it with the same extension used for the Fusion 1 and 2.

Dado insert

Dado blades (stack dado) make wider grooves in a single pass — perfect for drawer joints, shelves, tenons and straight housings. The standard insert in the Fusion saw only has a slit for a 3mm-thick blade, so for dado you have to swap it for a wide dado insert. our Fusion dado insert is cast in high-density aluminium and fits all three models. The maximum dado width is 13mm on the Fusion 1 (motor limitation) and 20mm on the Fusion 2/3.

Zero clearance throat plate

For splinter-free cuts in plywood, melamine and veneer you need a zero clearance insert. The standard insert has around 8mm of clearance around the blade — more than enough to chip the edge when the blade rises through the material. The zero clearance plate is a thin blank that you feed the blade through yourself for the first time, so that the slit becomes exactly the blade's thickness (3mm). The result is splinter-free cuts of the quality you would expect from a more expensive saw.

Riving knife for non-through cuts

The standard riving knife on the Fusion is adapted for through cuts. When you make non-through cuts — e.g. grooves, rabbets or half-laps — the riving knife has to be removed because it protrudes above the blade. This increases the safety risk dramatically. our low-profile riving knife does not protrude above the blade and can remain in place even during non-through cuts, which provides a safety margin and keeps dust extraction functional. A standard level of safety that is missing from many table saws.

Precision and adjustments

The quality of a table saw is not set on the spec sheet but in the factory adjustments — and in how well they hold over time. All three Fusion models specify a cast iron table that should be flat within 0.2mm per metre after factory machining. The T-glide fence should be parallel to the blade within 0.1mm across the entire travel — that is less than half the thickness of a 5-thou feeler gauge. The 45° lock has a factory check-stop with a tolerance of ±0.25°.

Practical commissioning. When a Fusion is delivered, you should verify three things before the first real cut:

1. Blade parallel to the T-slot — measure with a dial indicator (comparator) on the front and rear of the blade. A difference > 0.1mm means the trunnion needs adjusting. On the Fusion 3 this is done via the cabinet's trunnion bolt; on the Fusion 1/2 via the table-to-trunnion bolts.
2. T-glide fence parallel to the blade — lock the fence in the 30mm position and measure the distance to the blade at the front and rear. A difference > 0.1mm is adjusted via the fence's parallel screws.
3. 90° lock — use a precision square (a 200mm steel square) against the blade. A difference > 0.1° is adjusted via the stop screw on the tilt mechanism.

The Fusion 2 and Fusion 3 have electronic soft start — the motor ramps up over around 2 seconds rather than jerking to full speed immediately. This reduces load on the bearings, the V-belt and the electrical supply, and means you can start the saw on the same circuit as other equipment without tripping the fuse.

Dust collection and working environment

Every Fusion has a 4-inch (100mm) dust port as standard. The flow requirement for effective chip extraction is:

• Fusion 1: at least 900 m³/h
• Fusion 2: at least 1,100 m³/h
• Fusion 3: at least 1,200 m³/h at the 4-inch port, plus 250 m³/h at the blade guard's 1.5-inch port

Recommended dust collectors from the Laguna range:

• Laguna BFlux 1 (230V single phase, 1,600 m³/h) — sufficient for the Fusion 1 and Fusion 2 in a home workshop. Cyclone construction minimises fine dust in the main filter.
• Laguna CFlux 3 (400V three phase, 3,400 m³/h) — recommended for the Fusion 3 in a professional environment. Also sufficient for several machines in parallel (Fusion 3 + thickness planer + bandsaw via a shared manifold).

HEPA filter. Sawdust from MDF, plywood glues and hardwood is classified as carcinogenic (IARC Group 1 for beech, Group 2 for other hardwoods). A HEPA filter of class H13 or better is mandatory in a workshop where a table saw is used daily — otherwise you emit fine dust <2 μm that goes straight into the lungs. The Laguna CFlux 3 has HEPA H13 as standard; the BFlux 1 has a P3 filter (equivalent to EN 1822).

Hose system. Use HVLP hose (high volume, low pressure) with a 100mm diameter to the main port and 38mm to the blade guard. Flexible PVC hose works but loses 15-20% of flow compared to rigid plastic pipe. If the workshop is larger than 30 m², run a main pipe in PVC with branches to each machine — the joinery-standard solution for commercial workshops.

Price class and what you get

Exact prices are not listed here (they change with supplier exchange rates and model year), but typical Swedish prices including VAT in April 2026 are around:

• Laguna Fusion 1: 18,000–22,000 SEK
• Laguna Fusion 2 mod.2022: 28,000–32,000 SEK
• Laguna Fusion 3 (36" variant): 30,000–35,000 SEK
• Laguna Fusion 3 (52" variant with 1320mm rip): 35,000–38,000 SEK

The price difference between the Fusion 2 and the Fusion 3 is around 7,000 SEK for the 36" variant — a surprisingly small step for a dramatically better machine. Why so small? The Fusion 2 mod.2022 received a higher price point in 2022 after its upgrade, which narrowed the gap to the Fusion 3. This is one of the main reasons we recommend the Fusion 3 to semi-professionals who are hesitating — the extra cost for cabinet class, 3 HP and a better trunnion is small.

Alternatives in the Swedish market. Swedendro does not carry the Laguna Fusion in its range — their table saws are primarily Felder, Hammer and SawStop. If you want the Laguna Fusion in Sweden, Ernst P is the distributor for the entire Laguna range (we import both directly from Laguna Tools and via our EU distribution). It is also worth comparing with the SawStop PCS 3 HP (~68,000 SEK), which has ballistic blade braking as a unique safety feature, and the Hammer K3 Basic (~60,000 SEK), which is a compact sliding-table saw (another category — not directly comparable but competing for the same professional customer segment).

Decision guide — which one for you?

Home workshop, 230V 10A, simple projects: **Fusion 1**. Semi-professional working with plywood and softer wood: **Fusion 2 mod.2022**. Professional, whole plywood sheets, daily operation: **Fusion 3 (52" variant with 1320mm rip)**. If you are unsure and can afford it: choose the Fusion 3 — you will never wish for a smaller machine.

Choose the Fusion 1 if:

• Home workshop with a budget constraint (<25,000 SEK total incl. accessories)
• Primarily 16-18mm plywood and soft wood species (pine, spruce, birch)
• Ordinary 10 A electrical installation (no CEE supply)
• Operating time <10 hours per week
• Workshop area <15 m² (compact footprint is important)
• Mobility requirement (combined with a wheel system)

Choose the Fusion 2 mod.2022 if:

• Semi-professional / advanced hobbyist with mixed material
• 230V 13 A supply available (standard in Swedish homes)
• Space for a 160 kg machine (fixed or on wheels)
• Operating time 10-25 hours per week
• Building furniture with oak/ash up to 40mm thickness
• Kitchen, door and wardrobe projects in plywood + solid wood
• Wants a digital bevel indicator and the 2022 improvements

Choose the Fusion 3 if:

• Professional workshop with daily operation (>30 h/week)
• 230V 16 A CEE socket or permanent installation
• Regularly works with hard wood species (teak, walnut, oak 60mm+)
• Rips whole plywood sheets as a routine task → choose the 52" variant
• Edge glues table tops 2+ times per month (precision-critical)
• 10+ year investment horizon (the cabinet trunnion lasts forever)
• Professional dust collector (CFlux 3 or equivalent) connected

Common mistakes to avoid

Buying the Fusion 1 for professional use. It is possible, in theory. In practice, 1.5 HP will bog down after a few hours of daily operation in harder material, and the table-mounted trunnion has to be recalibrated more often than you want to spend time on. The Fusion 2 mod.2022 is the minimum for daily professional use; the Fusion 3 is the right choice.

Saving on the table extension. The standard rip capacity on the Fusion 1 is 762mm. A plywood sheet is 1220mm wide. Without the extension you have to build an auxiliary table or use an infeed rail on another saw — both solutions eat time and introduce errors. The table extension costs around 3,500 SEK and pays for itself after roughly 5 plywood projects.

Forgetting a proper dust collector. A table saw without a dust collector produces a cloud of sawdust that both ruins precision (chips on the table = inaccurate alignment) and damages the lungs over time. A Fusion 3 without a CFlux 3 or equivalent is half a waste — you are buying the machine for precision, and without a dust collector you lose it.

Forgetting a HEPA filter on the dust collector. Ordinary dust collectors (without HEPA) release fine dust <5 μm that flows back into the workshop air. Over months and years this becomes a serious working-environment problem, particularly in MDF work. At minimum a P3 filter (EN 1822 class H13 or equivalent) should be the last stage in the dust collector.

Skipping the calibration. A Fusion saw from the factory is 95% calibrated. The last 5% — measuring blade parallelism, fence parallelism and the 90° lock — is what separates a saw that cuts precisely from one that cuts "roughly". Spend an hour on the first day with a dial indicator and a precision square. It pays for itself in precision across the saw's whole lifetime.

Buying the cheapest blade. A Fusion is defined by its blade as much as by its own quality. A Freud LU85 Industrial Premium (~1,800 SEK) or a Forrest Woodworker II (~2,500 SEK) gives noticeably better cuts than a standard 500 SEK blade. Budget at least 10% of the saw's price for a quality blade.

Summary

The Laguna Fusion series is American premium for the Swedish joinery landscape. The Fusion 1 (1.5 HP, 762mm rip, steel wings) is the home workshop's entry-level machine — good to start with, limited for professional use. The Fusion 2 mod.2022 (1.75 HP, 914mm rip, cast iron wings, digital bevel indicator) is the semi-professional's choice for mixed use up to around 25 hours a week. The Fusion 3 (3 HP, 914-1320mm rip, full cast iron trunnion in the cabinet) is a cabinet-class professional saw for daily operation, whole plywood sheets, and material up to 79mm thick. All three share accessories — table extension, dado insert, zero clearance plate, riving knife — so you can start with the Fusion 1 and take the accessories with you if you later upgrade.

Ernst P AB distributes the entire Laguna Fusion range in Sweden, including all original accessories from Laguna Tools. You get support in Swedish, a Swedish warranty (2 years limited warranty under consumer law), and the opportunity to see the machines in our showroom before deciding. If you are unsure between two models, call us — we have seen hundreds of workshops make their choice and can help with the assessment based on your specific work and your workshop environment.

Related

• Laguna Fusion 3 — a deep dive into the flagship
• Bessey clamps — the complete guide
• How many bar clamps do I need?
• Jointer vs thickness planer — what is the difference?
• See all table saw accessories

Sources

Last updated 2026-04-18. Specifications verified against primary sources (the official Laguna Tools product pages and the EU-distributören EU distributor pages).

1. Laguna Tools — F3 Fusion Tablesaw (official). 3 HP TEFC motor, 220V, depth of cut 79mm (3-1/8") at 90°, 54mm (2-1/8") at 45°, standard 36" rip, cast iron trunnion, 385 lbs weight. lagunatools.com/classic/tablesaws/f3
2. Laguna Tools — F2 Fusion Tablesaw (official). 1.75 HP motor, 110V (US version), 36" rip, partial cast iron trunnion. lagunatools.com/classic/tablesaws/f2
3. Laguna Tools — F1 Fusion Tablesaw (official). 1.5 HP TEFC motor, 110V (US version), 30" rip capacity, 3,450 rpm. lagunatools.com/classic/tablesaws/f1
4. Laguna Tools — The Pocket Guide to Laguna Fusion Tablesaws. Official comparison of the F1/F2/F3 series with construction differences in trunnion, wings and cabinet. info.lagunatools.com
5. Rockler — Laguna F3 Fusion 3HP Table Saw, 36" Rip Fence. Third-party verification of 385 lbs weight, 220V 14 A, and 3,450 rpm operating speed. rockler.com/laguna-f3-fusion-3hp-table-saw-36-ripfence
6. Ernst P AB — Laguna range. Swedish distribution of the Fusion 1, 2 mod.2022 and 3 including original accessories from Laguna Tools. new.ernstp.se/brands/laguna