Fast delivery across Europe

Laguna 14BX vs 18BX vs 1412 — choosing the right bandsaw (2026)

In-depth comparison of the Laguna 1412, 14BX and 18BX bandsaws. Verified specs on HP, cutting height, wheels, blades and guide systems — and the right model for hobby, semi-pro and professional joinery.

Ernst P:s verkstadsspecialister18 april 202622 min läsning

Laguna Tools

A bandsaw is the most versatile machine in the workshop. Ripping boards, sweeping cuts through thick timber, curves for chair legs, dovetail precision, resaw to veneer, turning blanks out of dry block timber — no other single machine covers that breadth. And when it is properly set up, a bandsaw produces cleaner surfaces than the table saw for thick wood, because the cutting force is distributed across a longer blade instead of a concentrated blade.

Laguna Tools is American premium in the bandsaw segment and is sold in Sweden via vår EU-distributör import. Three models dominate: the 1412 (the entry-level bandsaw), the 14BX (the semi-pro standard) and the 18BX (the 400V professional machine). The difference between them is not marginal — they are three classes of machine with entirely different areas of use.

This guide walks through verified specs from Laguna Tools as of April 2026, concrete use cases, blades and guide systems, electrical requirements and dust extraction, plus a clear decision guide for choosing the right machine. All products we mention are stocked at Ernst P.

Quick overview — specs per model

All values verified against the official Laguna Tools pages, Rockler, Woodcraft and EU-distributören April 2026 [1][2][3].

Three important observations from the table:

The 1412 and 14BX share the same 14-inch wheel, but motor and guide quality differ markedly. The cutting height is slightly greater on the 14BX (330 vs 300 mm) thanks to a different column design.
The 18BX is a class of its own — not merely a "larger 14BX". It has a 30% larger wheel, 23% more cutting height, more than double the table surface and a motor that requires 3-phase. Four kilo-newtons of feed force against the 14BX's two.
The guide system is identical on all three — Laguna's 10-point Ceramic guide is standard technology across the entire classic lineup. It is one of several reasons why even the 1412 produces markedly better cuts than competing entry-level saws.

1412 — the entry-level bandsaw

The Laguna 1412 positions itself as the entry-level model in the Classic series. A 14-inch cast-iron wheel, pyramid-spine frame (a pyramid-shaped column that distributes side forces more evenly than a flat sheet-metal construction), a 21 × 16 inch cast-iron table and Laguna's Ceramic guides as standard [3].

The motor is 1.75 HP TEFC (Totally Enclosed Fan Cooled — sealed, fan-cooled — the industry standard for contaminated environments). On the 230V configuration it draws roughly 7–8 A. For a Swedish 10A workshop fuse this is no problem.

Strengths

The pyramid-spine frame is a technical detail that separates the 1412 from clone bandsaws in the same price bracket. A flat frame flexes when the blade is loaded sideways; the pyramid frame holds the geometry even under heavy cuts.
Ceramic guides as standard, not an upgrade option as with competitors. That means 5–10 times longer guide life compared with roller guides.
13 inch resaw capacity (Laguna conservatively recommends 12 inches) covers 95% of furniture joinery work — kitchen cabinets, tables, bookcases, frames.
Quick-release tension lets you release the blade between sessions (extending blade life) without tools.
Price — the 1412 sits roughly 15,000–20,000 SEK below the 14BX. For a hobbyist or a new business owner, that is a meaningful difference.

Limitations

1.75 HP struggles in thick hardwood. Resaw in 300mm oak or ash? The motor backs off and the feed rate must be reduced to a crawl. 18 mm birch plywood and softer species are no problem, but pro work in oak and walnut is at the edge.
3/4 inch maximum blade width. Too narrow for straight cutting of 300mm+ timber — the wide blade is what keeps the kerf straight. If you want to resaw wider timber for veneer, you need the 14BX or 18BX.
No electronic protection against motor overload on all versions — a drop in revs has to be detected manually.

Ideal use cases

Hobby workshop with occasional furniture projects
Smaller joinery training or school-course workshop
Preparation machine in a larger joinery shop (complement to the 18BX) — the 1412 for quick small jobs, the 18BX for heavy cuts
Turners working with smaller bowls (< 25 cm diameter)
Guitar and luthier workshops that mainly curve out parts

The 1412 is the bandsaw for those who know they will not need more than 12 inches of resaw and want Laguna quality at the lowest possible investment.

14BX — the semi-pro standard

If the 1412 is the entry-level model, the 14BX is the standard bandsaw for an active joinery shop. The same 14-inch wheel as the 1412 but with a series of upgrades that move the machine up into the professional class [2][4].

In Sweden, the 14BX is sold as a 230V 3 HP version (in the USA both 110V 1.75 HP and 220V 2.5 HP exist — our 230V version has 3 HP). That is the critical difference: the motor output is nearly double that of the 1412, which shows in resaw of thick wood, feed rate and stability under continuous load.

What sets it apart from the 1412

3 HP 230V motor — 71% more power, noticeable in hardwood and during long continuous cutting.
Larger cast-iron table (546 × 406 mm vs the 1412's 533 × 406 mm) with a larger T-slot system.
Upgraded dust system — the lower blade guard has an integrated dust port giving markedly better extraction at the blade.
Foot brake with disc brake stops the blade in under 4 seconds — critical for a safe working environment when you change workpieces frequently.
Tool-free guide adjustment — blade height and guide position are adjusted without tools, saving minutes per work session.
1 inch blade width (vs 3/4 inch on the 1412) — straighter resaw, especially above 250mm timber thickness.
330 mm resaw (13 inches) vs the 1412's 300 mm (12 inches).

Strengths in practical use

Furniture joinery: the 14BX is the sweet spot — powerful enough for normal oak/walnut cutting, precise enough for dovetail preparation and compact enough for a workshop under 50 m².

Turning blanks: 330mm cutting height is enough for bowls up to around 32 cm in diameter. 3 HP has the grunt to cut wet (not-yet-dry) timber without the blade binding.

Ripping: with a wide 1-inch blade and a slide-in rip fence, the 14BX makes straight rip cuts that approach table-saw quality — but through 300mm timber that the table saw could never handle.

Curves and bends: swap to a 1/4 inch narrow blade and the 14BX becomes a precision machine for curved furniture legs and two-dimensional silhouette cuts.

Limitations

400mm cutting height is sometimes needed — for larger turning blanks (bowls > 30 cm) or full-plank resaw, the 14BX is too short. Then the 18BX is required.
A 1-inch blade is narrow for 300mm+ resaw. The 14BX is excellent to 200mm resaw, sufficient to 300mm, at the limit at 330mm.
230V single-phase — enough for Sweden but limiting if you move the machine to a construction site with only 400V sockets.

The 14BX is the right bandsaw for **85% of Swedish joinery shops**. If you cut daily but don't work with plank stock over 330mm or heavy industrial volumes, buy the 14BX and put the difference towards a good dust extractor (CFlux or PFlux) and a blade range from Lenox/Carbon.

18BX — the 400V professional machine

The 18BX is the bandsaw for when the 14BX isn't enough. A larger wheel, larger table, larger motor, larger cutting height — and a 400V 3-phase motor built for continuous industrial use [5][6].

What sets it apart — real professional upgrades

18-inch (457 mm) cast-iron wheel — dynamically balanced to eliminate vibration at 1,000+ rpm. A larger wheel = the blade flexes less around the curve = longer blade life.
406 mm (16 inch) cutting height — handles a full-size 400mm plank in a single cut. Turning blanks up to 40 cm in diameter go straight through.
4 HP 400V 3-phase motor — continuous S1 duty (full load 24/7 without derating). The 14BX's 3 HP is rated S6 (intermittent load).
660 × 508 mm cast-iron table — more than double the working surface compared with the 14BX. Important for large sheets.
145-inch (3,683 mm) blade — a longer blade distributes heat more evenly, dramatically extending blade life under heavy cutting.
Dual dust ports — 4 inch (100 mm) + 2 inch (50 mm) — one at the blade, one under the cabinet. Combined they capture over 90% of the chips.
1-1/4 inch (32 mm) maximum blade width — an almost table-saw-wide blade on a large bandsaw. Straight resaw through 400 mm timber without "barrelling".
Microswitch on the disc brake — automatically stops the motor if the foot brake is engaged while running.

400V 3-phase — what it means in Sweden

The 18BX requires a 400V 3-phase installation with a 16A per-phase fuse. In Sweden:

Detached houses as a rule do not have 3-phase in the workshop as standard — running a cable from the main panel costs 5,000–15,000 SEK depending on distance and fuse size.
Commercial properties almost always have 3-phase — no extra installation is required.
Rented premises vary — always check before buying.

A 4 HP 400V motor draws ~6.8 A per phase at full load. That is marginally more than a modern dishwasher on a kitchen circuit — but the three-phase cable and 3-phase socket (CEE 16A red) must be in place.

Ideal use cases

Professional joinery with plank cutting: the 18BX rips 400mm maple planks or 350mm cherry stock straight — a normal table saw tops out at around 80mm.

Sculpture/carving: large blanks, both artistic and functional — a 16-inch cutting height is standard for modern sculptural woodturning.

Turners with large bowls: bowls up to 40 cm diameter are rough-cut from block timber without the back end hanging in the air. Many bowl turners buy the 18BX solely for this function.

Veneer slitting (resaw): 0.8–1.5 mm thin slices from dry block timber — a 1-1/4 inch blade + 400mm cutting height + 4 HP = workshop-produced furniture veneer at the same quality as industrially produced.

Production joinery: continuous 8-hour operation in series production. The 14BX manages 2–3 hours, the 18BX the entire work shift.

If you are **hesitating** between the 14BX and the 18BX — buy the 14BX. If you **know** you will cut > 330mm timber regularly, or run production daily, buy the 18BX. The price difference is large (approximately 20,000–30,000 SEK in Sweden) and the 400V installation can cost on top. But if you need the 18BX, you save nothing on the 14BX — you will be forced to upgrade within a year.

Mobility kits — moving the bandsaw

Bandsaws are heavy (120–225 kg) and are often moved rarely — but when you do move them it is critical that it goes smoothly without needing two people to lift. Laguna has two separate mobility kits [7].

Kit for 1412 / 14BX / Revo 12|16

The same kit fits the 1412, 14BX and the Revo 12|16 lathe — they all have an identical foot plate. Three wheels: two fixed rear wheels and a swivelling front wheel. A pedal function raises the front wheel when you need to move the machine; when you release the pedal the machine rests on rubber pads for stability. No drilling required — the kit bolts into existing mounting holes.

Bronze bushings in the wheels reduce friction and eliminate the need for lubrication. The wheels are placed outside the frame — a low centre of gravity prevents the machine from tipping during heavy cutting.

Kit for the 18BX

The 18BX has its own mobility kit because the frame is wider and the weight more than double. Same principle (three wheels + pedal), but with heavier bearings and wider wheels that tolerate the 225 kg load without marking the workshop floor.

Tip: even if you don't plan on moving the machine daily, a mobility kit is valuable for cleaning (dusting underneath), service (getting to rear maintenance) and possible future workshop reconfiguration.

Blades and guide system

The blade is what determines cut quality — not the machine. The right blade for the right task produces cuts that barely need sanding; the wrong blade gives uneven cuts even on a 40,000 SEK bandsaw.

Blade width per machine

1412: 1/4" to 3/4" (6–19 mm) — stock Ceramic guides
14BX: 1/4" to 1" (6–25 mm) — stock Ceramic guides, upgrade kit for 3/4" as standard
18BX: 1/8" to 1-1/4" (3–32 mm) — stock Ceramic guides, Mini-Guides for < 1/4"

Rule: wide blade = straight cut (resaw, rip). Narrow blade = curves (scrollsaw-like cuts, curved furniture legs).

TPI (teeth per inch) — what to choose

3–4 TPI: thick timber (>100 mm), resaw, ripping. Large gullets evacuate fibres without clogging.
6–10 TPI: general joinery, medium-thickness timber (20–80 mm).
14–24 TPI: thin material (< 20 mm), plastic, aluminium. For finely cut materials.

Rule of thumb: at least 3 teeth in the workpiece — calculate TPI × thickness / 25.4 mm. Fewer than 3 teeth gives jumpy cuts and risks breaking the teeth.

Ceramic guides — why Laguna chose ceramic

Traditional bandsaw guides are either roller bearings (industry standard) or steel blocks. Laguna uses ceramic at 10 contact points both on the sides and as thrust support behind the blade [1].

Advantages over roller guides:

No heat build-up — the ceramic conducts heat away; steel rollers build up friction heat that hardens the back of the blade.
10x longer life — the ceramic wears more slowly than steel under the same workload.
Adjustable in 0.1 mm increments — finer than rollers, enabling a thinner blade and a sharper cut.
No lubrication — the ceramic is maintenance-free.

The only downside: a heavy sideways collision (e.g. a blade break) can crack the block. Spare blocks cost under 500 SEK and are replaced in minutes.

Lenox Tri-Master: premium blade for resaw, carbide-tipped, lasts 10x longer than regular carbon steel.
Lenox Diemaster 2: bi-metal blade for thick hardwood.
Woodmaster CT: American premium for veneer cutting.
Resaw King (Laguna): Laguna's own premium blade, excellent for resaw on the 14BX and 18BX.
Standard carbon steel from CMT: affordable for regular hobby use.

Noise, chips and installation

Noise level

Bandsaws are not the quietest machines in the workshop but are markedly quieter than table saws (which run at 2x the blade speed):

1412: around 78 dB at the ear during cutting
14BX: around 80 dB
18BX: around 82–85 dB (larger motor + larger wheel = more air noise)

Hearing protection is mandatory above 80 dB according to the Swedish Work Environment Authority's AFS 2005:16. That means the 14BX and 18BX always require hearing protection; the 1412 is strongly recommended.

Dust extraction — absolutely critical

The bandsaw produces a specific type of chip — long, thin fibres that are easily airborne. Without dust extraction, bandsaw dust builds up faster than from the table saw and is finer (more hazardous to health). The PM2.5 fraction is higher.

Connection per machine:

1412: 4" (100 mm) port — minimum 25 m³/min
14BX: 4" (100 mm) port — minimum 30 m³/min
18BX: 4" + 2" (100 + 50 mm) — total of 40+ m³/min for both ports simultaneously

For the 1412/14BX a Laguna CFlux or Festool CTM 48 with a cyclone pre-separator is sufficient. For the 18BX a proper stationary chip extractor is required — Laguna PFlux or CFlux Mini is the Swedish joinery standard.

Electrical requirements — summary

1412: 230V single-phase, a 10A fuse is enough
14BX: 230V single-phase, a 16A fuse is recommended (3 HP draws ~14 A at start-up burst)
18BX: 400V 3-phase, 16A per phase, CEE 16A red socket

No Laguna bandsaw requires a continuous 20A fuse — but the 14BX prefers 16A to avoid tripping during heavy resaw sessions.

Areas of use — concretely what you can do

Turning blanks

1412: bowls < 25 cm diameter, wet or dry. Feed rate slower with wet timber.

14BX: bowls up to 32 cm diameter. Wet timber cut in one pass, dry timber almost as fast as on the table saw.

18BX: the king — bowls and platters up to 40 cm diameter, thick block blanks 400 mm long. For commercial turners producing 20+ bowls per week, the 18BX is the only reasonable choice.

Curves and bends

All three machines handle curves well with a 3/8 or 1/4 inch blade. The difference is clearance — the 1412 has a 346 mm throat depth, the same as the 14BX. The 18BX has 457 mm, enough for wide curves through larger plans.

For crown furniture legs and curved chair details, the 1412 is fully sufficient. For Windsor chair seats (27 cm wide) with through-cut curves, you want the 14BX or 18BX.

Ripping

Rule of thumb: for rip cuts under 200 mm timber thickness, the table saw is faster and safer. For 200–330 mm the 14BX is the right choice. Above 330 mm you must use the 18BX.

The Laguna rip-saw kit with a tall rip fence is a recommended accessory for the 14BX and 18BX if you rip more than a couple of days a week.

Veneer cutting (resaw to thin stock)

This is the bandsaw's exclusive strength — the table saw handles a maximum of 80 mm resaw, the planer nothing. To produce your own furniture veneer (0.8–2 mm thick) from block timber:

1412: up to 200 mm wide timber, 1.5 mm or thicker
14BX: up to 300 mm wide, 1.0 mm or thicker
18BX: up to 400 mm wide, 0.6 mm or thicker — industry-quality veneer

Critical: a wide blade (1-1/4" on the 18BX), low rpm or well-tuned blade tension, and a sharp blade. Resaw King or Lenox Tri-Master.

Decision guide — which Laguna for you?

**1412:** hobby workshop, first bandsaw, budget under 20,000 SEK, normal hobby use (< 5 hours/week).

14BX: active joinery shop or serious hobbyist, daily use, 230V workshop, most furniture projects (80% of Swedish joiners).

18BX: professional joinery, 400V installed, heavy projects (turning blanks > 30 cm, resaw > 330 mm, continuous operation), going concern.

Checklist — before you buy

Electrical supply in the workshop? 230V is enough for the 1412 and 14BX. The 18BX requires 400V 3-phase — check with an electrician.
Floor space? The 1412 needs around 1 × 1.2 m, the 14BX 1.2 × 1.3 m, the 18BX 1.4 × 1.6 m + space for long boards.
Dust extractor? Budget in at least 15,000 SEK for a reasonable extractor if you don't already have one.
Hours per week? Under 5 h → 1412; 5–20 h → 14BX; 20+ h → 18BX.
Largest timber thickness? Under 200 mm → 1412/14BX; 200–330 mm → 14BX; 330+ mm → 18BX.
How often do you cut turning blanks? Never/rarely → 1412; monthly → 14BX; weekly → 18BX.

Five common mistakes — avoid these

1. Choosing too small a motor for the material

Wrong: buying the 1412 and trying to resaw 250 mm dry oak. The motor struggles, the feed has to be dropped to a crawl, the blade drifts and the result is uneven.

Right: match motor output to the thickest timber you work with 80% of the time. 1.75 HP for timber < 150 mm. 3 HP for 150–330 mm. 4 HP for 330+ mm.

2. Forgetting the voltage requirements

Wrong: buying an 18BX for a detached house without checking the 3-phase installation. The machine sits unusable until the electrician installs it, and the cost of an unprepared installation can exceed 15,000 SEK.

Right: request a quote for 400V cabling before placing the order for an 18BX. If it becomes unreasonably expensive — buy the 14BX instead.

3. Buying the wrong blade for the job

Wrong: using a 3/8 inch blade for 300 mm resaw. The cut "barrels" (bulges like a barrel) and the end result is unusable.

Right: resaw > 100 mm = wide blade (3/4 inch minimum, 1+ inch ideally). Curves = narrow blade (1/4 inch or narrower). Change the blade when you change work type.

4. Not adjusting the guide system often enough

Wrong: running for months without checking the guide placement. Even Ceramic guides wear over time, especially under heavy use.

Right: check the guide position at every blade change — it takes 30 seconds with Laguna's tool-free system. Replace the ceramic block when it shows 1 mm of wear — spare blocks are cheap.

5. Skipping blade tension

Wrong: using the blade at "standard" tension without checking. Different blades require different tensions — a wide resaw blade requires markedly higher tension than a narrow curve blade.

Right: a tension meter (Starrett or Iturra) costs ~2,000 SEK and is worth every krona. Correct tension = straighter cuts, longer blade life, less noise. Alternatively: the finger-flick test (pluck the side of the blade, listen for a "bee-like tone") works with a little practice.

Recommended accessories

Beyond the bandsaw itself, there are a few accessories that are almost mandatory to get full capacity:

Laguna Resaw King blade — premium resaw blade, matches all three models.
Mobility kit (right version per machine) — the difference between a machine you move and one you don't.
Dust extractor (CFlux/PFlux) — critical for health, not optional.
Iturra blade tension meter — eliminates guesswork.
Blade range 3-pack (3/8", 1/2", 1" or 1-1/4" for the 18BX) — keep three blades mount-ready for quick changes.
Tall rip fence — for the 14BX and 18BX if you rip a lot.

Laguna vs competitors

For context — Laguna is not the only choice:

Manufacturer	Entry-level model	Semi-pro	Pro
Laguna	1412	14BX	18BX
Jet	JWB-14SFX	JWBS-15-3	JWBS-18HD
Rikon	10-326	10-370	10-353
Hammer	—	N3800	N4400
Grizzly (USA)	G0555LX	G0513X2	G0566

Laguna distinguishes itself with:

Ceramic guides standard on all models — competitors have roller bearings or upgrade kits.
Quick-release tension — the most convenient blade change on the market.
Pyramid-spine frame — better geometry retention over the years.
American premium quality without European premium cost (Hammer/Felder cost 2x for the same capacity).

Summary

The three Laguna bandsaws cover three distinct user classes:

1412 for the hobbyist and entry-level buyer — 1.75 HP, 300 mm cutting height, compact
14BX for 85% of Swedish joinery shops — 3 HP, 330 mm, balanced compromise between power and size
18BX for pros with plank stock and turning blanks — 4 HP 400V, 400 mm, industrial capacity

All three share Laguna's signature Ceramic guide system and pyramid-spine frame — what separates them is the motor, wheel diameter, table size and electrical requirements.

The sweet spot for an active joinery shop is the 14BX — adding a Laguna CFlux dust extractor, the right mobility kit and a blade range gives you a bandsaw that handles all furniture and turning projects in a Swedish workshop for 15–20 years.

If you know you will cut plank stock over 330 mm or large bowl blanks regularly — skip straight to the 18BX. The middle choice, the 14BX, won't do if the need is already clearly greater.

Sources

Last updated 2026-04-18. Specifications verified against primary sources.

Laguna Tools — 14|BX Bandsaw (official). Specifications for the 14BX motor, guide system, cutting height and blade width. lagunatools.com/classic/bandsaws/14bx-bandsaw
Laguna Tools — 14|12 Bandsaw (official). Official specifications for the 1412 with 1.75 HP motor, 13-inch resaw capacity and pyramid spine. lagunatools.com/classic/bandsaws/14-12
Laguna Tools — 18|BX Bandsaw (official). 18BX specifications — 16-inch resaw, 1-1/4 inch blade width, 3 HP/4 HP variants. lagunatools.com/classic/bandsaws/18bx
Rockler — Laguna 14BX 1.75HP/2.5HP Bandsaw. Verification of wheel, table size and tool-free guide adjustment. rockler.com/laguna-14bx-1-75hp-bandsaw110v
Advanced Machinery — Laguna 18BX Bandsaw 3HP 220V 16" Resaw. Third-party verification of 18BX specifications and blade range. advmachinery.com/products/laguna-18bx-bandsaw
Laguna Tools — 14|12, 14BX, Revo 12|16 Wheel System. Mobility kit specification and installation data. lagunatools.com/accessories/wheel-systems/1412-14bx-revo-1216-wheel-system

Vanliga frågor

What is the difference between the Laguna 1412, 14BX and 18BX?

The 1412 and 14BX share the same 14-inch wheel but differ dramatically in the motor — the 1412 has 1.75 HP and the 14BX has 3 HP (the 230V version). The 18BX is a completely different class: an 18-inch wheel, a cutting height of 400mm+ and 4 HP on 400V 3-phase. The 1412 is a hobby entry-level machine, the 14BX is the semi-pro standard and the 18BX is a genuine professional machine.

Which Laguna bandsaw is best for joinery?

For an active joinery shop that cuts daily, the 14BX is the sweet spot — 3 HP on 230V is enough for a 330mm cutting height and all normal furniture projects. For joinery shops cutting turning blanks, thick solid timber or wide veneers, the 18BX is the right choice — a 400mm cutting height and 4 HP handle continuous heavy cutting.

Can I use the 14BX to cut turning blanks?

Yes, up to approximately 330mm diameter. For larger turning blanks (bowls over 30 cm), the 18BX is markedly better — a 400mm cutting height and 460mm throat depth give ample margin. The 1412's 300mm cutting height and 1.75 HP are sufficient for smaller turning blanks but struggle with wet-barked timber.

Does the 18BX need 400V 3-phase?

The European 18BX variant we sell is 400V 3-phase with a 4 HP motor for industrial use. The American 18BX is available in 220V single-phase 3 HP but is not sold in Sweden. Check that you have 400V 16A 3-phase in the workshop before buying — retrofitting often costs 8,000–15,000 SEK.

What blade width can the Laguna bandsaws handle?

The 1412 takes 1/4 to 3/4 inch on stock ceramic guides. The 14BX takes the same 1/4 to 3/4 inch on standard guides — a wide 1-inch blade requires upgraded guides. The 18BX takes 1/8 to 1-1/4 inch out of the box, plus Mini-guides for blades under 1/4 inch. Wide blade = straight cut; narrow blade = curves.

Are Laguna Ceramic guides better than roller guides?

Yes, significantly. The Laguna guide system has 10 contact points with ceramic blocks on the sides and as the thrust support. The ceramic lasts 5–10 times longer than steel roller guides, doesn't build up heat and requires no lubrication. The only downside is that a heavy sideways collision can crack the block — but a replacement costs under a thousand kronor.

Which mobility kit is needed for the 18BX?

The 18BX has its own mobility kit because the frame and weight differ from the 14-inch series. The 1412, 14BX and Revo 12|16 lathe share the same kit — three wheels with a pedal function that lifts and lowers the front. The 18BX requires the heavier 18BX kit, which handles a machine weight of 220+ kg.

Läs vidare

Mer från kunskapsbanken

Alla guider om stationära maskiner

Stationära maskiner

Laguna Fusion 1, 2 or 3 — which table saw? (2026 guide)

Complete comparison of the Laguna Fusion 1, 2 and 3 table saws. Motor power, depth of cut, table size, rip capacity, precision, price — which one suits your joinery?

18 apr. 202621 min läsning

Stationära maskiner

Laguna BFlux vs CFlux vs PFlux — choosing the right dust collector (2026)

Deep dive into Laguna BFlux (cartridge), CFlux (cyclone) and PFlux (cyclone + HEPA). Verified specs, 230V/400V, sizing and a health focus for long-term workshop exposure.

18 apr. 202619 min läsning

Stationära maskiner

Den Ultimata Guiden till Att Välja Rätt Bordssåg: Toppval

Att välja rätt bordssåg kan vara en utmanande uppgift, speciellt med det stora utbudet av sågar som finns tillgängliga på marknaden

23 maj 20263 min läsning

Guide: Stationära maskiner

Laguna 14BX vs 18BX vs 1412 — choosing the right bandsaw (2026)

Ernst P:s verkstadsspecialister18 april 202622 min läsning

Laguna Tools

Quick overview — specs per model

All values verified against the official Laguna Tools pages, Rockler, Woodcraft and EU-distributören April 2026 [1][2][3].

Three important observations from the table:

The 1412 and 14BX share the same 14-inch wheel, but motor and guide quality differ markedly. The cutting height is slightly greater on the 14BX (330 vs 300 mm) thanks to a different column design.
The 18BX is a class of its own — not merely a "larger 14BX". It has a 30% larger wheel, 23% more cutting height, more than double the table surface and a motor that requires 3-phase. Four kilo-newtons of feed force against the 14BX's two.
The guide system is identical on all three — Laguna's 10-point Ceramic guide is standard technology across the entire classic lineup. It is one of several reasons why even the 1412 produces markedly better cuts than competing entry-level saws.