Toimitus koko Pohjoismaihin Suomeen
Low maintenance, hot melt edge pre-gluer for pre-gluing materials such as: plastic or wood laminate strips, layered strips, 0.4 to 2 mm PVC edges, ABS, polyester, melamine or wood veneer tapes. The machine glues tapes for later use with edfebanders for pre-glued tapes, as manufactured by Virutex, or with any hot air edgebanding machines. It has thermoelectric temeprature control, automatic start and stop of the feed motor, depending on the glue tmeprature, and an accurate dosage mechanism which dispenses the exact amount of glue to obtain the required density on the back of the tape. It consumes between 160 and 200 g of glue per sqm. It has a built-in manual winder which lets the original roll easily unwind and then rewinds it with the tape already glued and ready for use. Using the optional kit, two similar tape rolls can be pre-glued at the same time. Standard equipment Manual winder, 2 multidiameter reel centering devices, 1 kg of glue and a cardboard roll centre ring.
Input power: 1.720 W
Min. tape thickness: 0,4 mm
Max. tape thickness: 2 mm
Max. tape width: 104 mm
Feeding speed: 8,5 m/min
Tank capacity: 2 Kg. de cola
Weight: 26 Kg
241 arvostelua
Keskimääräinen arvio – 241+ vahvistettua asiakasarvostelua
Mitä asiakkaamme sanovat Ernst P:stä
“Henkilökunta oli erityisen ystävällistä ja asiantuntevaa. Vahva suositus”
“Oikea työkalu liimaamiseen hyvään hintaan. Nopea toimitus”
“Ennallistin vanhan viulun lakan tällä aineella. Tulos oli todella hyvä. Pintahalkeamat ja epätasaisuudet häviävät kokonaan.”
“Syntymäpäivälahja erittäin iloiselle poikaystävälle”
“Hiomakivi oli odotusteni mukainen – hyvä purevuus, tukeva ja pysyi hyvin paikallaan kumialustalla”
“Täydellinen pienten puuhuonekaluvaurioiden korjaamiseen.”
“Tuote täysin odotusten mukainen. Palvelu fantastinen! Ilo asioida Ernst P:llä.”
“Oikeita kamppeja, todella nopea ja hyvä toimitus, mahtavaa”
“Henkilökunta oli erityisen ystävällistä ja asiantuntevaa. Vahva suositus”
“Oikea työkalu liimaamiseen hyvään hintaan. Nopea toimitus”
“Ennallistin vanhan viulun lakan tällä aineella. Tulos oli todella hyvä. Pintahalkeamat ja epätasaisuudet häviävät kokonaan.”
“Syntymäpäivälahja erittäin iloiselle poikaystävälle”
“Hiomakivi oli odotusteni mukainen – hyvä purevuus, tukeva ja pysyi hyvin paikallaan kumialustalla”
“Täydellinen pienten puuhuonekaluvaurioiden korjaamiseen.”
“Tuote täysin odotusten mukainen. Palvelu fantastinen! Ilo asioida Ernst P:llä.”
“Oikeita kamppeja, todella nopea ja hyvä toimitus, mahtavaa”
Lähetetään yleensä 4–7 arkipäivässä.
Low maintenance, hot melt edge pre-gluer for pre-gluing materials such as: plastic or wood laminate strips, layered strips, 0.4 to 2 mm PVC edges, ABS, polyester, melamine or wood veneer tapes. The machine glues tapes for later use with edfebanders for pre-glued tapes, as manufactured by Virutex, or with any hot air edgebanding machines. It has thermoelectric temeprature control, automatic start and stop of the feed motor, depending on the glue tmeprature, and an accurate dosage mechanism which dispenses the exact amount of glue to obtain the required density on the back of the tape. It consumes between 160 and 200 g of glue per sqm. It has a built-in manual winder which lets the original roll easily unwind and then rewinds it with the tape already glued and ready for use. Using the optional kit, two similar tape rolls can be pre-glued at the same time. Standard equipment Manual winder, 2 multidiameter reel centering devices, 1 kg of glue and a cardboard roll centre ring.
Input power: 1.720 W
Min. tape thickness: 0,4 mm
Max. tape thickness: 2 mm
Max. tape width: 104 mm
Feeding speed: 8,5 m/min
Tank capacity: 2 Kg. de cola
Weight: 26 Kg