Toimitus koko Pohjoismaihin Suomeen
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg
241 arvostelua
Keskimääräinen arvio – 241+ vahvistettua asiakasarvostelua
Mitä asiakkaamme sanovat Ernst P:stä
“Huippua, vihdoin löysin hiomapaperia hiomakoneelleni. Tilaan pian lisää.”
“Syntymäpäivälahja erittäin iloiselle poikaystävälle”
“Henkilökunta oli erityisen ystävällistä ja asiantuntevaa. Vahva suositus”
“Oikeita kamppeja, todella nopea ja hyvä toimitus, mahtavaa”
“Toimii kuten pitää, tämä malli on luottolaite”
“Täydellinen pienten puuhuonekaluvaurioiden korjaamiseen.”
“Hyvä valikoima ja hinta, hienoa palvelua ja toimitus, kiitos!”
“Ennallistin vanhan viulun lakan tällä aineella. Tulos oli todella hyvä. Pintahalkeamat ja epätasaisuudet häviävät kokonaan.”
“Huippua, vihdoin löysin hiomapaperia hiomakoneelleni. Tilaan pian lisää.”
“Syntymäpäivälahja erittäin iloiselle poikaystävälle”
“Henkilökunta oli erityisen ystävällistä ja asiantuntevaa. Vahva suositus”
“Oikeita kamppeja, todella nopea ja hyvä toimitus, mahtavaa”
“Toimii kuten pitää, tämä malli on luottolaite”
“Täydellinen pienten puuhuonekaluvaurioiden korjaamiseen.”
“Hyvä valikoima ja hinta, hienoa palvelua ja toimitus, kiitos!”
“Ennallistin vanhan viulun lakan tällä aineella. Tulos oli todella hyvä. Pintahalkeamat ja epätasaisuudet häviävät kokonaan.”
Lähetetään yleensä 4–7 arkipäivässä.
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg
Lähetetään yleensä 4–7 arkipäivässä.