Levering i hele Norden via DHL
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg
241 anmeldelser
Gennemsnitlig bedømmelse – 241+ verificerede kundeanmeldelser
Hvad vores kunder siger om Ernst P.
“Fødselsdagsgave til en meget glad kæreste”
“Slibestenen var, hvad jeg havde forventet – godt bid, stabil og lå godt fast med gummiunderlaget”
“Det rette værktøj til limning til god pris. Hurtig levering”
“Endelig noget, der virker, godt resultat.”
“Produkt helt som forventet. Servicen fantastisk! En fornøjelse at handle hos Ernst P.”
“Toppen, endelig har jeg fundet sandpapir til min slibemaskine. Bestiller snart mere.”
“Godt sortiment og pris, fin service og levering, tak!”
“Perfekt til at reparere småskader på træmøbler med.”
“Fødselsdagsgave til en meget glad kæreste”
“Slibestenen var, hvad jeg havde forventet – godt bid, stabil og lå godt fast med gummiunderlaget”
“Det rette værktøj til limning til god pris. Hurtig levering”
“Endelig noget, der virker, godt resultat.”
“Produkt helt som forventet. Servicen fantastisk! En fornøjelse at handle hos Ernst P.”
“Toppen, endelig har jeg fundet sandpapir til min slibemaskine. Bestiller snart mere.”
“Godt sortiment og pris, fin service og levering, tak!”
“Perfekt til at reparere småskader på træmøbler med.”
Sendes normalt inden for 4–7 hverdage.
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg
Sendes normalt inden for 4–7 hverdage.